Vol.13 No.1
|
| Message from President |
 |
Tadakazu Okuno |
3 |
| Message from President |
|
Ryusuke Nishimura |
4 |
| Article |
Quality and Reliability -Examine-What is Quality- |
Kaoru Ishikawa |
5 |
| Tutorial |
Failure Analysis in Reliability Engineering |
Hiroshi Shiomi |
11 |
| Tutorial |
Design Technology for High Reliable System |
Ayatomo Kanno |
17 |
| Lecture |
A Fresh Look at SQC |
Tadakazu Okuno |
23 |
| Lecture |
Management and Quality Control |
Tatsuo Sugimoto |
28 |
| Reportage |
The 22nd Technical Conference |
|
31 |
| Reportage |
The 10th Symposium |
Fumio Ookusa |
34 |
| Reportage |
The 12th Annual Conference |
|
40 |
| Contributed Paper |
Biases and Mean Square Errors of Estimators Using Weibull Probability Paper |
Masami Miyakawa |
47 |
| Technical Note |
Analysis of Experimental Data by Mean of Analysis of Factorial Effect -A Graphical Procedure in the Place of ANOVA |
Sumio Maeno |
54 |
| Case Method |
Structural Integrity of the Transport Aircraft |
Tadao Kamiyama |
63 |
| Case Method |
Reliability and Quality Control of the Serial Prints |
Tsuyoshi Watanabe |
69 |
|
|
Kunio Nakano |
|
|
|
Eizo Yamada |
|
|
|
Mitsugi Tanaka |
|
| Case Method |
Present Status and Reliability of Automatic Mechanical Test System |
Shozo Saito |
78 |
| Case Method |
Accelerated Life Test (Automobile) |
Mitsumasa Shigematsu |
89 |
|
|
Masashi Shigemori |
|
|
|
Report and Annual Schedule from JSQC |
|
96 |
|
A Nominal List of JSQC Leader |
|
104 |
Vol.13 No.2
|
| Article |
Quality and Economy |
Shizuo Senju |
3 |
| Article |
Quality and Cost -The Concept and Management- |
Masao Umeda |
9 |
| Reportage |
The 11th Symposium |
Shin-ichi Makishima |
16 |
| Reportage |
The 12th Symposium |
Kazunobu Arai |
23 |
| Contributed Paper |
A Simplified Design Procedure for the Single Sampling Plans by Attributes with Given Producer's and Consumer's Risk |
Akihiro Kanagawa |
32 |
|
|
Hiroshi Ohta |
|
| Contributed Paper |
A Doodness of Fit Test for the Bradley-Terry Model by a Multiple Comparisons Approach |
Chihiro Hirotsu |
37 |
| Technical Note |
Systems Approach to QC Systems of Job Production |
Osamu Furukawa |
46 |
|
|
Masao Kogure |
|
|
|
Shohei Ishizu |
|
|
|
Naohiko Yagi |
|
| Technical Note |
Consistency of Quality-Engineering and Precoordination |
Osamu Furukawa |
60 |
|
|
Hideya Ishizuchi |
|
|
|
Shiro Kakami |
|
| Material |
The Activities and Their Economical Effects in the Deming Prize won Enterprises |
Noriaki Kano |
67 |
|
|
Hideaki Tanaka |
|
|
|
Yukio Yamaga |
|
| Case Method |
An Activity of a Failure Cost in a Design Phase |
Hiroshi Ito |
76 |
|
|
Hideto Tanifuji |
|
| Case Method |
Quality Management at Kojima Corporation |
Masakatsu Yasu |
84 |
Vol.13 No.3
|
| Article |
Evolution of Quality and Evolution of Quality Functions |
Shigeru Mizuno |
3 |
| Article |
Recent Tendency of Quality Evolution |
Yoji Akao |
9 |
|
|
Tadashi Ohfuji |
|
| Reportage |
The 23th Technical Conference |
|
20 |
| Reportage |
The 13th Symposium |
Yukihiro Ando |
29 |
| Contributed Paper |
Chart and Its Operating Characteristics |
Hisakazu Shindo |
40 |
| Technical Note |
A Study on Error of Experimental Data for "A Graphical Procedure" |
Sumio Maeno |
49 |
| Technical Note |
Quality Table for Service Industry and an Application of Quantification Theory(Ⅲ） to It |
Hisakazu Shindo |
53 |
|
|
Tadashi Yoshizawa |
|
|
|
Masaaki Miyajima |
|
| Technical Note |
Quality Evolution Including Cost, Reliability and Engineering -Part1 Desing of Quality,cost and Reliability- |
Yoji Akao |
61 |
|
|
Tadatoshi Ono |
|
|
|
Akira Harada |
|
|
|
Hideharu Tanaka |
|
|
|
Kazuo Iwasawa |
|
| Technical Note |
Quality Evolution Including Cost, Reliability and Engineering -Part2 Evolution of Engineering, Cost, Subsystem and Process- |
Yoji Akao |
71 |
|
|
Tadatoshi Ono |
|
|
|
Akira Harada |
|
|
|
Hideharu Tanaka |
|
|
|
Kazuo Iwasawa |
|
| Activity Report of Research Section |
Preliminary Test in Regression -Activity Report of System Analysis Research Section- |
Cho-ichiro Asano |
78 |
|
|
Hiroshi Ohta |
|
| Case Method |
Evolution and It's System for Development of New Product -Case Study on Application of Quality Table- |
Takao Taniguchi |
83 |
|
|
Masakatsu Miura |
|
| Case Method |
Quality/Cost-Evolution Chart of a Technique for the Development of a New Product -The NE Extraction Method for Planning Quality and Achieving Target Production Cost Based on Quality Evolution- |
Akira Hasegawa |
92 |
|
|
Yoshinori Maekawa |
|
|
|
Kenji Aizawa |
|
| Case Method |
Quality Evolution System of Komatsu Ltd. Oyama Plant |
Masayuki Takahashi |
98 |
Vol.13 No.4
|
| Preface |
Towards a Fresh Look at SQC |
Tadakazu Okuno |
3 |
| Article |
Current Topics on Statistical Quality Control and Inspection |
Yoritake Fujino |
4 |
| Article |
|
Noriaki Kanoh |
10 |
| Tutorial |
Data Analysis in Quality Control with Special References to Multivariate Analysis |
Yauo Ohashi |
15 |
| Tutorial |
Current Status of Marketing Research -From the Field of Data Collection- |
Kazuo Kobayashi |
30 |
| Forum |
What is Expected for Study on SQC from Company Side |
Editorial Comittee |
36 |
| Reportage |
The 14th Symposium |
Isao Itsukage |
43 |
| Contributed Paper |
CUSUM Charts in Process Adjustment |
Ken Nishina |
47 |
| Contributed Paper |
One Generalized Preventive Maintenance Model |
Hajime Makabe |
56 |
| SQC Review |
Acceptance Sampling -Recent Activity of ISO/TC69/SC5 and Related Matters |
Tsuneo Yokoh |
64 |
| Case Method |
Quantifying of Sensory Evaluation |
Hideo Sato |
70 |
|
|
Kunio Iijima |
|
|
|
Yoshitaka Matsumura |
|
| Case Method |
The Way of Intensive Designing Procedure |
Kazuhiro Yoshinobu |
77 |
|
|
Youichi Yoshihiro |
|
| Case Method |
On Difficulty of Making Judgement |
Sho Kamiiisaka |
85 |
