Vol.10 No.1
|
| Message from President |
 |
Kan-ichiro Ishibashi |
3 |
| Message from President |
|
Masao Kogure |
4 |
| Article |
Quality Control for 1980's |
Tetsuichi Asaka |
5 |
| Article |
Quality Control for 1980's |
Shoichiro Toyota |
9 |
| Article |
Role of Today's QC Circle Activities |
Tatsuo Sugimoto |
13 |
| Lecture |
Total Quality Control in Japan |
Kan-ichiro Ishibashi |
19 |
| From Abroad |
Quality Control in China |
Chang-wen Liu |
24 |
| Reportage |
The 16th Technical Conference |
|
29 |
| Reportage |
9th Annual Conference |
|
33 |
| Contributed Paper |
On Variable Selection Methods in Multiple Regression Analysis |
Hitoshi Kume |
38 |
|
|
Iketsu Cho |
|
| Case Method |
Standardization of the Sensory Test |
Hideko Furukawa |
47 |
| SQC Review |
Variable Selection in Regression Analysis |
Yasushi Taga |
54 |
|
|
Report and Annual Schedule from JSQC |
|
61 |
|
A Nominal List of JSQC Leader |
|
67 |
Vol.10 No.2
|
| Article |
The Loss Due to Variation of Product's Function and Producer's Liability |
Gen-ichi Taguchi |
3 |
| Article |
Quality Control System and System Theory |
Osamu Furukawa |
|
| Tutorial |
Multivariate Analysis of Cosmetics Quality Characteristics |
Masaaki Yoshida |
11 |
| Tutorial |
Uniform Product Liability Law (1) |
Ichiro Miyauchi |
15 |
| From Abroad |
Letter from Japanese Quality Control Staff in Americans Manufactory |
Ko-jiro Kawasaki |
22 |
| Contributed Paper |
The Selection of a Optimum Screening Position in a Manufacturing Process |
Sumio Maeno |
27 |
| Contributed Paper |
Variation Diminishing Spline Function Representation of the Probability Density Function and its Characteristic Function |
Kiyoshi Tsukakoshi |
30 |
| Technical Note |
Nomograph for Obtaining Confidence Intervals of MTBF in the Case of the Exponential Distribution |
Tetsuo Miyamura |
42 |
| Case Method |
Inspection and Test Procedure for Reliability Assurance |
Shigeru Takagi |
52 |
Vol.10 No.3
|
| Article |
Role of QC in the Innovation Society |
Kaoru Masaki |
3 |
| Tutorial |
Characteristics of Sampling Inspection Systems with Severity Adjustment |
Takeshi Koyama |
9 |
| Tutorial |
Uniform Product Liability Law (2) |
Ichiro Miyauchi |
17 |
| Lecture |
Prosperity, only through the Quality Fast Policy |
Ren-ichi Takenaka |
23 |
| Reportage |
The 17th Technical Conference |
|
29 |
| Contributed Paper |
Two-Sample Tests for Ordered Categorical Data and Their Performance |
Hiroyuki Uesaka |
36 |
|
|
Masashi Goto |
|
| Contributed Paper |
Analysis of Interaction Effects in a Two-way Layout without Replication |
Chihiro Hirotsu |
47 |
| Case Method |
Damage Tolerance Design |
Tadao Kamiyama |
54 |
| Case Method |
QEC Activities on IC Fabrication |
Keiichi Shimakura |
|
|
|
Yuuichi Haneta |
61 |
Vol.10 No.4
|
| Article |
Company-Wide Quality Control is One of the Revolutional Concept for Management |
Kaoru Ishikawa |
3 |
| Article |
Value Analysis and Quality Control |
Yukio Kishimoto |
12 |
| Article |
How to Represent the Performance of Measuring Instruments? |
Kozo Iizuka |
18 |
| From Abroad |
The Situation is not so Bad. That's a Problem of U.S.-Interview with Dr. J. M. Juran- |
Noriaki Kanoh |
25 |
| Reportage |
The 6th Symposium |
Shoichi Simizu |
31 |
| Contributed Paper |
Sampling Inspection Plan by Variables(σUnknown) Based on the Non-Central t Distribution and Consideration on Its Approximation Formulae |
Takao Enkawa |
36 |
| Contributed Paper |
An Approximating the Binomial Confidence Limit |
Yoritake Fujino |
45 |
| SQC Review |
Chain Sampling Inspection Plans |
Hiroyuki Takahashi |
52 |
